Geyser Not Heating? Causes and Fixes You Can Check Safely
A practical checklist for a geyser that gives lukewarm or cold water, starting with the checks anyone can do and ending with when to call a technician.
How to clean a kitchen chimney at home in India: filters, oil collector and body, safe cleaners, how often to clean, and what not to do. Step-by-step.
Indian cooking produces a lot of oil and smoke, so a kitchen chimney's filters clog quickly. A clogged chimney sucks poorly, makes more noise, drips oil and puts extra strain on the motor. Regular cleaning fixes most of these problems and costs very little. This guide shows how to clean the filters, the oil collector and the body safely at home, how often to do it and when to call a professional.
| Part | Typical frequency |
|---|---|
| Mesh or cassette filter | Every 1 to 2 weeks with heavy frying, otherwise about monthly |
| Baffle filter | About every 1 to 2 months |
| Oil collector cup | When you notice oil in it, weekly for heavy use |
| Outside body and panel | Weekly wipe |
| Deep clean (service) | Every 3 to 6 months |
Follow your model's manual if it gives a different schedule.
The oil collector cup or tray usually sits at the bottom or side of the chimney. Empty it, wash it with hot soapy water, dry it and refit it. Do not let it overflow, since oil can drip on the stove.
If your chimney has an auto-clean feature, run the cycle when the manual recommends, often every few weeks. It heats the oil on the inner surface so it drains into the collector. You still need to empty the oil collector and wipe the outside, and you should clean the filters or mesh if your model uses them.
If the chimney still has weak suction after cleaning, makes grinding noises or the oil keeps leaking, ask the brand's service centre or a technician. Deep servicing also helps with the motor and ducting. A bent or long duct reduces suction, so check that as well.
Thinking of replacing it? See our best kitchen chimney guide.
Affiliate link. We may earn a commission at no extra cost to you.
Clean mesh or cassette filters every 1 to 2 weeks with heavy frying, otherwise about monthly. Baffle filters every 1 to 2 months, and do a deep clean every 3 to 6 months.
Hot water with dishwashing liquid works for most filters, and a degreaser safe for the material helps with heavy grease. Avoid harsh acids on aluminium.
Only if your manual says so. Many baffle filters are dishwasher safe, but mesh filters may not be.
Yes. You still need to empty the oil collector, wipe the body and clean any filters.
Check for a long or bent duct, a clogged motor, damp or wrongly fitted filters, and call service if it persists.
A practical checklist for a geyser that gives lukewarm or cold water, starting with the checks anyone can do and ending with when to call a technician.
A heater that will not switch on, gives no heat or keeps tripping needs a safe, ordered check. This guide covers power, tip-over and overheat cut-offs, dust and element faults.
Slow flow, bad taste, constant dripping, no water or a noisy pump. The usual causes of RO and UV purifier problems and which ones need a technician.